Pure Air PA2
To reduce the risk of fire, electric shock, or other injury, follow all instructions and safety guidelines.
- This air purifier is not to be used by person (including children) with reduced physical, sensory, or mental capacities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Do not use the air purifier in wet or humid environments, or outdoors. This appliance is designed for indoor use only.
- Do not put the air purifier on an uneven floor such as a bed or sofa. Always make sure to place the air purifier on a flat surface before operating. Leave more than 20 cm distance between the air purifier and the wall.
- Do not place the air purifier near sources of heat, such as stove tops, ovens, or radiators.
- Do not handle the unit with wet hands. Thoroughly dry your hands before handling any part of the air purifier.
- Do not use without removing the plastic wrap from the air purifier and filters.
- Do not attempt to use other filters with this appliance. Only use air replacement filters for this unit.
- Do not block the air inlet or outlet with anything.
- Do not insert fingers or objects into the air outlet.
- Do not immerse air purifier in liquids or clean the appliance with any liquid to avoid electric shock and/or electrical fires.
- WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid state speed control device.
- WARNING: To reduce the risk of fire, electric shock or injury to persons, do not use replacement parts that have not been recommended by the manufacturer (e.g. Parts made at home Using a 3D printer).
- Do not use your air purifier if it is damaged or not working correctly, or if the cord or plug is damaged. Do not try to repair it yourself. Contact customer support
- 1. Wozoyo Pure Air PA2 Air Purifier: 1 Unit
- 2. Compound Filter: Pre Filter, Nano Silver Anti-Bacterial Filter, HEPA 13 Filter and Activated Carbon Filter: 1 Unit
- 3. Thank You Card: 1 Unit
- 4. Power Adapter: 1 Unit
| Item | Description |
|---|---|
| Model | Pure Air PA2 |
| Adapter input | 100-240V~, 50/60Hz |
| Output | 12V=1.5A |
| Rated Power | 18W |
| Noise (High Speed) | 50dB/A |
| Noise (Low Speed) | 22dB/A |
| CADR | 165m³/h |
| Applicable Area (1ACH) | 673 ft²/63m² |
| Net weight | 1.9kg |
| Product Measurements | L205Xw205xH312mm |
| 4 in 1 Filter | Pre-Filter, Nano Silver Anti-Bacterial, HEPA 13 Filter and Activated Carbon Filter |
EPA EST. NO.:87627-CHN-2
Made in China
The air purifier is equipped with Pre-Filter, True HEPA Filter and Activated Carbon Filter.
1. Rotate the bottom panel counterclockwise to remove the panel.
2. Take the filter and power adapter out of the air purifier.
3. Remove the Protective PE Bag from the filter and then re-insert the filter.
4. Rotate it clockwise to tighten the bottom panel.
Control Panel:
| Function | Description |
|---|---|
Power
|
Power Button
Connect the power adaptor to the DC socket located on the air purifier. Plug the adaptor into an AC electrical outlet. CAUTION: Only use the power adaptor that is provided with the unit. Do not use other power adaptors. When the Air Purifier is plugged into the wall socket, press the "Power" button to turn on the Air Purifier. By pressing the "Power" button again, the Air Purifier goes into standby mode. |
Speed
|
Fan Speed When the Air Purifier is powered on, press the Fan Speed button to adjust the fan speed of the Air Purifier. This Air Purifier has three fan speed levels, from low (1) to high (3). |
Sleep
|
Sleep Mode Press the Fan Speed button to toggle between fan speeds and sleep mode, when device is in sleep mode, all the lights on the control panel will turn off except for sleep indicator, the Air purifier will operate at the lowest Fan speed. Press any button to exit the Sleep mode. |
Timer
|
Timer Button Short press Timer button to set a timer for 1, 2, 4 & 8 hours. |
Light
|
Light Button
Short press to turn the light on or off. Filter Reset: Press the Light button for 3 seconds once the Filter is replaced. |
Cleaning the unit
- Please turn off the Air Purifier and unplug power plug before cleaning the air purifier.
- To remove dust, lightly wipe the unit with a soft, clean cloth. If needed, wipe the unit with a clean damp cloth, then immediately dry with a clean dry cloth. Don't use alcohol, oil, or benzene to clean the unit.
- Do not immerse the unit in water.
- To clean the 3 in 1 compound filter, use a dry, soft cloth to wipe it down.
Replacing the filter
- The actual filter replacement frequency depends on its usage and air quality.
- After Replacing the filter, press the Light button for 3 seconds to enable "filter reset function", otherwise the filter light will keep blinking.
| Malfunction | Inspect / How to Fix |
|---|---|
| Cannot turn on power or touching any button has no response | Q: Is the Air Purifier stable and placed on the ground? A: Place the Air Purifier in a stable manner on the ground. Q: Is the Air Purifier in child-lock mode? A: If "CHILD LOCK" icon is on, deactivate Child Lock mode. |
|
1. The Air Purifier is giving off a foul smell. 2. The Air Purifier has been running for a long time but has had no significant improvement in air quality. |
A: Change the Air Purifier placement and position. A: Leave 20cm clearance on all sides of the air purifier. A: The filters may be dirty. Clean the filters as per instructions in the user manual. A: The filters may need replacement. Purchase new filters. A: The protective plastic bag may not have been removed from the filters. Remove it. A: The filters may not be placed in the correct manner. Place them correctly. |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Company Name: Secure Connection Limited
Address: 807, Arion Commercial Centre,
2 - 12 Queen's Road West,
Sheung Wan, Hong Kong
Telephone: +852 5803 1828
Download English Manual