Save These Instructions
- Please plug the charger into an AC wall socket/outlet with a rated voltage of 100~240V
- The product is designed for use with IT equipment only. Do not use the charger with any product which is not in conformity with rated specifications of this charger.
- It's normal for this charger to heat up a little during use.
- In case the charger stops charging suddenly, this may be due to an incident of over-current/over-temperature/over-voltage/short-circuit protection. In this case, please unplug the connected device/s. Reconnect your device/s after 30 seconds, the charger will resume normal functioning.
- Do not place the charger close to any sources of heat such as fire, stove, candles etc.
- Please ensure that no form of liquid is split on the charger. (Any such spill of any liquid on the charger voids the warranty on the product).
- The maximum ambient temperature during use of the appliance must not exceed 25°C.
- The disconnection from line voltage is made by AC plug.
- Only use a dry cloth or brush to clean the charger.
- In case of failure or component defect, don't attempt to repair the charger. Please reach out to Wozoyo customer support.
| Item | Specification |
|---|---|
| Total Wattage | 65W Max |
| Input | 100-240V~50/60Hz 1.5A-Max |
| Output | USB-C1:3.3V-11V⎓5A；5V⎓3A,9V⎓3A,12V⎓3A,15V⎓3A,20V⎓3.25A; (65W Max) USB-C2:3.3V-11V⎓5A；5V⎓3A,9V⎓3A,12V⎓3A,15V⎓3A,20V⎓3.25A; (65W Max) USB-A： 5V⎓3A, 9V⎓3A，10V⎓2.25A,12V⎓2.5A，20V⎓1.5A; (30W Max) USB-C1+USB-C2:45W+20W USB-C1+USB-A : 45W+18W USB-C2+USB-A: 5V⎓4.8A(24W) USB-C1+USB-C2+USBA:45W+15W |
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Please note that changes or modifications of this product is not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Company Name: Secure Connection Limited
Address: 807, Arion Commercial Centre, 2 - 12 Queen’s Road West, Sheung Wan, Hong Kong
Telephone: +852 5803 1828
Download English Manual